Chevrolet 2006 Corvette Owner'S Manual Download Page 73 | Manualshive

Page: 73 / 426

Chevrolet 2006 Corvette Owner'S Manual Download Page 73

From the inside, use the power door lock switch
located at the top of the door panel near both windows.
See Power Door Locks on page 2-12.

To open a door from the inside, press the button (B) in
front of the door handle and push the door open. You will
hear a tone when the button is pressed.

If power to the vehicle or the keyless access transmitter
is lost, there are two ways to open the door.

From inside the vehicle, use the door release handle
located on the floor next to each seat. Pull the handle
up to unlock and unlatch the door.

From outside the vehicle, use the door release tab
located on the carpet inside the trunk on the driver’s
side of the vehicle. Pull the tab to unlock and unlatch
the driver’s door. See Hatch/Trunk on page 2-14 for
information on opening the trunk during a loss of power.

2-11

«
...
71
72
73
74
75
...
»

Summary of Contents for 2006 Corvette











































































































































































































































































































































































































































Reviews:

No comments