Chevrolet 2006 Avalanche Owner'S Manual Download Page 419

Page: 419 / 532

Front Turn Signal, Sidemarker and
Daytime Running Lamps

Vehicles without Body-Side Cladding

To replace a front turn signal, sidemarker, or DRL bulb,
do the following:

1. Remove the headlamp assembly as mentioned

previously. See

Headlamps on page 5-55

for

more information.

2. Press the retainer clip (arrow), located behind the

turn signal assembly, towards the outside of the
vehicle.

3. Pull the turn signal assembly out from the vehicle.

5-59

Summary of Contents for 2006 Avalanche





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands

Chevrolet 2006 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands