Chevrolet 2006 Avalanche Owner'S Manual Download Page 415

Page: 415 / 532

Headlamps

Vehicles with Body-Side Cladding

To replace a headlamp bulb, do the following:

1. Open the hood. See

Hood Release on page 5-12

for more information.

2. Remove the turn

signal/parking lamp
assembly by pressing
the release clip on
the outboard side of the
assembly and pulling
the outboard end
toward you.

3. Pull the inboard side of the assembly out from the

vehicle.

4. Pull the pins away from their clips and pull them up

until they completely release from the vehicle.

5. Pull the headlamp assembly out of the vehicle.

5-55

Summary of Contents for 2006 Avalanche





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Avalanche

Reviews:

Brands by name

Popular brands

Chevrolet 2006 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2006 Avalanche

Reviews:

Brands by name

Popular brands