Chevrolet 2005 Uplander Owner'S Manual Download Page 346

Page: 346 / 460

3. After the engine cools, open the coolant air bleed

valves.

There are two bleed valves. One is located on the
thermostat housing. The other is located on the
thermostat bypass tube.

4. Fill the radiator with the proper DEX-COOL

coolant mixture, up to the base of the filler
neck. See Engine Coolant on page 5-22 for more
information about the proper coolant mixture.

If you see a stream of coolant coming from an
air bleed valve, close the valve. Otherwise, close the
valves after the radiator is filled.

5. Rinse or wipe any spilled coolant from the engine

and the compartment.

Housing

Bypass Tube

5-32

Summary of Contents for 2005 Uplander













































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Uplander

Reviews:

Related manuals for 2005 Uplander

Brands by name

Popular brands

Chevrolet 2005 Uplander, Owner'S Manual

Search results

Summary of Contents for 2005 Uplander

Reviews:

Related manuals for 2005 Uplander

Brands by name

Popular brands