Chevrolet 2001 tracker, Owner'S Manual, Page: 227 / 391

5-7
8. Now connect the black
negative (
-
) cable to
the good battery’s
negative (
-
) terminal.
Don’t let the other end
touch anything until the
next step.
9. The other end of the
negative (
-
) cable
doesn’t go to the dead
battery. It goes to a
heavy, unpainted metal
part on the engine of
the vehicle with the
dead battery.
Attach the cable at least 18 inches (45 cm) away
from the dead battery, but not near engine parts that
move. The electrical connection is just as good there,
but the chance of sparks getting back to the battery is
much less.
10. Now start the vehicle with the good battery and run
the engine for a while.
11. Try to start the vehicle with the dead battery.
If it won’t start after a few tries, it probably
needs service.
12. Remove the cables in reverse order to prevent
electrical shorting. Take care that they don’t touch
each other or any other metal.