manualshive.com logo in svg

Chevrolet 2001 Malibu, Owner'S Manual

Share
Download
Chevrolet 2001 Malibu Owner'S Manual Download Page 98

2-33

As you signal a turn or a lane change, if the arrows flash
rapidly, a signal bulb may be burned out and other
drivers won’t see your turn signal.

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check for burned

-

out bulbs and then check

the fuse. See “Fuses and Circuit Breakers” in the Index.

Headlamps

The headlamp control is on the turn 
signal/multifunction lever.

 Turn the headlamp control to this symbol to turn

on the following:
D Parking Lamps
D Sidemarker Lamps
D Taillamps
D License Plate Lamps
D Instrument Panel Lights

 Turn the headlamp control to this symbol to turn on

the following:
D Headlamps
D Parking Lamps
D Sidemarker Lamps
D Taillamps
D License Plate Lamps
D Instrument Panel Lights
Turning the headlamp control to AUTO will provide for
automatic operation of the headlamps, taillamps and
parking lamps. For more information see “Automatic
Light Control” later in this section.

Summary of Contents for 2001 Malibu
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands