manualshive.com logo in svg

Chevrolet 2000 Astro, Owner'S Manual

Share
Download
Chevrolet 2000 Astro Owner'S Manual Download Page 15

1-3

Manual Lumbar Support (If Equipped)

If you have this feature, there will be a knob located 
on the inboard side of the driver and passenger 
bucket seats.

Turn the knob toward the front of the vehicle to increase
lumbar support. Turn the knob toward the rear of the
vehicle to decrease lumbar support.

Power Seats (If Equipped)

If you have this feature, there will be a control pad
located on the inboard side of the driver and passenger
bucket seats.

The front control makes the front of the seat go up 
and down.

The center control makes the whole seat go forward,
rearward, up or down.

The rear control makes the rear of the seat go up 
and down.

Summary of Contents for 2000 Astro








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands