i
Front Panel
1. Power switch - used for turning on / off the amplifier
2. Gain control
3. LED
indicators:
Green LED ON indicates that the amplifier is on.
Green LED SIGNAL indicates the presence of the signal.
Red LED PEAK indicates the clipping (flattening the peaks of the waveform) of the
amplifier, i. e. that audio signal level exceeds the capacity of the amplifier.
The clip-limiter detects this and reduces the gain to minimize the amount of
overdrive.
To preserve as much of the program dynamics as possible, clip-limiter works only if
clipping occurs frequently.
It is recommended to reduce the input signal input level until PEAK indicator stops.
Rear Panel
7
8
Summary of Contents for S240LP
Page 7: ...11 12...
