manualshive.com logo in svg

Chetco Digital Instruments SeaSmart.Net, User Manual, Page: 25 / 59

Share
Download
Chetco Digital Instruments SeaSmart.Net User Manual Download Page 25

SeaSmart.Net Adapter Manual Version1.3 

25

CONNECT MODE

 – To enable Connect Mode, use the drop down menu and select DISABLED for 

Mode. Connections to designated Host IP Address will be initiated and held upon device power up. Under 
Host 1, enter the target IP Address, Port Number, and Protocol (TCP or UDP). The Local Host Port 
Number does not need to be specified as it is randomly generated.  

If using UDP Broadcasts, enter in the local network broadcast address (ends in 255). For example on the 
Private IP Network of 192.168.0.0 the broadcast address would be 192.168.0.255. UDP packets will then be 
sent to all devices on the local network. Each listening device must be set to ACCEPT on their own IP 
address. 

 

 

Connect Mode – UDP Broadcast – Data is sent to all 
devices on the subnet using the specified port number. 
Each receiving device must be set to listen on its on 
interface IP address. Allows multiple devices to receive 
the same SeaSmart.net transmissions 

Connect Mode – Web Server Post – Setting the 
protocol to TCP and Port number to 80 will enable 
SeaSmart.net to POST data directly to a local Web 
Server running ASP. The live data can then be logged 
and viewed with any Browser. 

 

Summary of Contents for SeaSmart.Net




























































Reviews:

No comments