CHESTER Craftsman, Instruction Manual

Page: 13 / 53

Basic Theory
The usual conception of cutting suggests clearing the substance apart with a thin knife or wedge. When
metal is cut the action is rather different and although the tool will always be wedge shaped in the cutting
area and the cutting edge should always be sharp the wedge angle will be far too great for it to be
considered knife shaped. Consequently a shearing action takes place when the work moves against the
tool
.
Figure 4. Basic Metal Cutting Theory
Figure 4 shows a tool being moved against a fixed work piece. When the cut is in progress the chip
presses heavily on the top face of the tool and continuous shearing takes place across the shear plane
AB. Although the Figure shows a tool working in the horizontal plane with the work piece stationary, the
same action takes place with the work piece revolving and the tool stationary.
Chester UK Craftsman Lathe
12