Placement
When you mount a MultiSensor on a wall or ceiling, please mind the following:
-
Aim the MultiSensor at the desired detectionzone. Refer to the MultiSensor product sheet
(see chess-wise.eu/downloads) for the detection specifications.
-
Place the MultiSensor on a location without direct or (in-)direct sunlight. Ie; reflection of
water or parked cars outside the space.
-
Make sure that the MultiSensor is not influenced by light from another lighting group in your
building.
Examples of placement
Configuration
Use the iPad Mymesh commission app for the configuration of the MultiSensor. First enable
commissioning mode by pressing the hidden button (an arrow is placed on the backside).
When the commissioning mode is activated, the PIR will blink red 3 times. When in
commissioning mode, the motion detector is active. (Red LED = motion detected). After
pressing the button or waiting 60 seconds, the MultiSensor switches back to normal mode.
Possible configurations of the MultiSensor:
-
Motion detection (one or multiple sensors)
-
Automatic daylight harvesting (with one sensor)
-
Motion detection (with one or multiple sensors) and automatic daylight harvesting (with
one sensor).
-
Standard configuration for the MultiSensor is motion detection.
