Safety
-
Installation should be performed only by qualified personnel.
-
Do not use the MultiSensor if it is damaged.
-
This product contains a non-replaceable and non-rechargeable Lithium battery.
-
The MultiSensor has protection class IP54 and is suitable for use at indoor and covered
outdoor locations.
MultiSensor
Mymesh Building Light Control
The Mymesh MultiSensor is part of the Mymesh Building Light Control product suite for wire
-
less lighting control. The MultiSensor is a motion and light sensor with a lifetime battery for
flexible wall mounting. The MutliSensor offers the possibility for daylight harvesting and
automatic light control based on presence and light level.
Application
-
Refer to the MultiSensor product sheet (see chess-wise.eu/downloads) for the product
specifications and the environmental conditions.
Installation
-
Attach the mounting plate with at least 2 screws or double-sided adhesive tape to a wall or
ceiling. Avoid positions vulnerable for mechanical impact (e.g. by transport carts).
-
Use the optional 45° mounting bracket to place the sensor under an angle.
-
Insert the MultiSensor at one side in the mounting plate and push the switch until it locks.
by Chess
Installation instruction
