5
- HCL
1.
Bioloog Ian
2.
Kerel met duikbril
Installation instruction micro BLC 0-10V Industrial
v1.2 / 18-06-2021
www.chess.nl
Configuration
When the micro BLC 0-10V industrial is powered, the connected lamp should go on. Use the iPad Mymesh
commission app for configuration of the micro BLC 0-10V industrial.
The micro BLC 0-10V industrial is shown in the commission app with a combined lamp/sensor symbol.
Installation and configuration of an add-on motion sensor will be described in a future version of this
document.
Usage
The micro BLC 0-10V industrial will control the connected driver and lamp.
Compliance
This product complies with the European directives and relevant standards for low voltage, EMC, RED, REACH
and RoHS. The micro BLC 0-10V industrial contains a 2.4 GHz radio. The applied frequency of the radio is within
the band 2.401 – 2.483 GHz and the maximum transmit power is +4 dBm.
Hereby, Chess Wise declares that the radio equipment type micro BLC 0-10V industrial is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity will be available at chess.nl.
Repair
Do not open this product. In case of failure the micro BLC 0-10V industrial must be replaced.
Recycling
Do not dispose this product as household waste, but bring it to an appropriate collection point for recycling.
