Chery QQ6, Service Manual

Page: 9 / 37

without the alarm horn).
4.6. Disalarm mode
a) How to disalarm:
After the body enters into the alarm mode:
①
press down any pushbutton on the remote
controller.
b) Body state after disalarming:
1. If the triggered alarm door is in open state (not give an alarm for the vehicle without
the alarm horn).
Press down the UNLOCK pushbutton on the remote controller to
①
disalarm;
②
unlock
the central door lock.
Press down the LOCK pushbutton on the remote controller to
①
disalarm;
②
enable the
arming to be failed.
2. If the triggered alarm door is in close state (not give an alarm for the vehicle without
the alarm horn):
Press down the LOCK pushbutton on the remote controller to
①
disalarm;
②
disarm, and
carry out the secondary arming after 28 s.
Press down the LOCK pushbutton on the remote controller to
①
disalarm;
②
enter into
the arming mode.
4.7. Arming failure mode
a) If door, engine hood, trunk fail to close at the same time, pressing the Arm key can
’
t set
up the arming condition:
After the failure of body arming:
①
the left/right turn signal lamp lights.
III. Fog and Position Lamps Control