20
LIMIT SWITCH SETTING IN MANUAL MODE
Learning the limit switches in manual mode is required for blinds that do not
have either internal or external safety lugs (A).
Either flexible (B) or rigid (C) ribs may be used for the connection to the tube.
A
B
C
PROCEDURE FOR LIMIT SWITCH SETTING IN MANUAL MODE
Depending on your individual needs, it’s possible to learn first either the upper or the
lower limit switch.
EXAMPLE 1
SETTING AS FIRST THE UPPER LIMIT SWITCH
If the rolling shutter is completely open, you have first to drive it down by around
20 cm.
Using the button switch, put the blind to the upper desired position and to memorise,
perform the indicated sequence of commands; (UP-UP-UP).
Using the button switch, put the blind to the lower desired position and to memorise,
perform the indicated sequence of commands; (DOWN-DOWN-DOWN).
UP
UP
HOLD
UP
2 sec
DOWN
DOWN
DOWN
HOLD
2 sec
DOWN
UP
?
E
NG
L
IS
H
