32
SETTInG THE CLOSInG pOSITIOn
SETTInG THE OpEnInG pOSITIOn
example 2:
Setting first the closing position
Hold the button A or C pressed and drive to the closing position.
with lockdown hangers:
press buttons A or C until the motor stops automatically.
without lock down hangers:
use the button A or C to drive on the necessary closing
position.
if the rolling shutter is completely closed, you have firstly to drive up by around
20 cm.
To set the closing position, press buttons B (stop) and C (down) simultaneously for about
2 seconds, until the motor performs automatically a short “up” movement.
This move is the visual confirmation of the setting operation.
Tn: Already programmed remote control
pressing now button A, drive completely up the rolling shutter to the opening position.
with physical stops:
press button A until the motor stops automatically.
without physical stops:
use the button A and C to drive to the necessary opening
position.
To set the opening position, press buttons A (up) and B (stop) simultaneously for about 2
seconds, until the motor automatically performs a short “down” movement.
This move is the visual confirmation of the setting operation.
Tn: Already programmed remote control
confirm
+ C
B
Tn (2 sec)
A
C
confirm
A
+
A
B
Tn (2 sec)
Tn
?
E
N
G
L
I
S
H
