8
2 Surface under the mouse
A bright, structured surface under the mouse
saves energy, increases effectiveness and
ensures optimum motion detection.
A reflective surface is not suitable for using
the mouse on.
3 LED
Depending on the application, the LED shows
you when to put your finger on the sensor.
4 Cleaning the mouse
CAUTION: Damage may be
caused by harsh cleaning agents
or liquids in the mouse
• Do not use solvents such as gasoline or
alcohol and scouring agents or scouring
sponges for cleaning.
• Prevent liquids from entering the mouse.
1 Clean the mouse with a slightly damp cloth
and some mild cleaning agent (e.g.
dishwashing liquid).
2 Dry off the mouse with a soft, lint-free
cloth.
5 Disinfection
Should it be necessary to use alcoholic
disinfectant for hygienic reasons, you can use
isopropyl alcohol (IPA) to clean and disinfect
the mouse and the fingerprint sensor. This
can cause the appearance of the surface to
change. However, the operation of the mouse
and the sensor will not be affected by the
correct use of alcoholic disinfectant.
Intensive cleaning of the housing with
alcoholic disinfectant over a long period can
also damage the plastic.
EN
