1
G H-703
P o w e r R i v e t e r
The Cherry® GH-703 is a pneumatic-
hydraulic tool designed specifically for the most
efficient installation of commercial fasteners. It
weighs only 5 pounds and can be operated in
any position with one hand. It has a full 3/4”
rivet setting stroke and a rated pull load of 2000
pounds.
The GH-703 riveter operates on a wide range of
air pressure, with 90 to 120 psi providing the
maximum efficiency. At 90 lbs. air pressure, the
GH-703 has a decibel rating of 80dB(A) and
consumes 3 CFM at 20 cycles per minute.
A mandrel catcher bag may be attached to
eliminate costly cleanup.
The GH-703 comes equipped with nose-
piece 728A9-6 to set:
N Rivets - 3/16” diameter
Q Rivets - 3/16” diameter
Cherrymate
®
Rivets - 1 /4” diameter
There is also a spare nosepiece, 728A9-4,
included for setting:
N Rivets - 1 /8” diameter
Q Rivets - 1 /8” diameter
Cherrymate
®
Rivets - 3/16” diameter
Warning: Approved eye protection
should be worn when operating, re-
pairing, or overhauling this tool.
MANY OTHER STYLES AND SIZES OF COMMERCIAL RIVETS CAN BE SET WITH THIS
TOOL. REFER TO THE NOSEPIECE SELECTION CHART ON PAGE 8 FOR APPLICABLE
PART NUMBERS.
Summary of Contents for GH-703
Page 5: ...4...
