1224 East Warner Ave,
Santa Ana, Ca 92705
Tel: 1-714-545-5511
www.cherryaerospace.com
TS-H753A-275NP Rev: - Date: 06/03/08 DCR: 08-0734
H753A-275NP
RIVETLESS NUT PLATE® RIGHT ANGLE PULLING HEAD
Technical Data Sheet
, Page 2 of 2
1
2
3
4
5
6
7
8
9
10
11
11 12
13
13
14
14
15
15
16
17
18
19
20
PARTS LIST
GENERAL / TECHNICAL QUESTIONS
1224 E. Warner Avenue
Santa Ana, CA 92705 USA
1-714-850-6022 (Phone)
1-714-850-6093 (Fax)
LOCTITE
®
is a registered trademark of Henkel Corporation.
LUBRIPLATE® is a registered trademark of Fiske Brothers Refining Co.
20
671A16
JAM NUT
1
19
975-020 ADAPTER FITTING
1
18
975-021 DRAWBOLT
1
17
753A11
GUIDE PIN
1
16
753B6
BELL CRANK
1
15
753A9
LINK PIN
4
14
P-954
LINK
8
13
753A10
PIVOT PIN
2
12
753A16
GUARD
1
11
P-930
SET SCREW
2
10
P-413
BUTTON HEAD SCREW
1
9
753B5
LEVER
1
8
975-018 COLLET BOLT
1
7
975-019 FRAME
1
6
P-1319
SPRING
1
5
975-017 JAW FOLLOWER
1
4
975-014 JAW SET
1
3
753A13A COLLET
1
2
975-015 PILOT INSERT
1
1
975-016 SLEEVE
1
ITEM
No.
PART
NUMBER
DESCRIPTION
QTY.
PER
WARRANTY
Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected according to generally accepted practices of companies manufacturing industrial or aerospace
fasteners. In the event of any breach of the foregoing warranty, Buyer’s sole remedy shall be to return defective goods (after receiving authorization from Seller) for replacement or refund of the purchase price, at
the Seller’s option. Seller agrees to any freight costs in connection with the return of any defective goods, but any costs relating to removal of the defective or nonconforming goods or installation of replacement
goods shall be Buyer’s responsibility. SELLER’S WARRANTY DOES NOT APPLY WHEN ANY PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE PRODUCT IS MADE BY BUYER. THE
FOREGOING EXPRESS WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES; ANY IMPLIED WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR
MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND EXCLUDED BY SELLER. This warranty is void if seller is not notified in writing of any rejection of the goods within ninety (90) days after receipt
of the goods by buyer.
Seller shall not be liable under any circumstances for incidental, special or consequential damages arising in whole or in part from any breach by Seller, AND SUCH INCIDENTAL, SPECIAL, OR CONSEQUENTIAL
DAMAGES ARE HEREBY EXPRESSLY EXCLUDED.
Our policy is one of continuous development. Specifications shown in this document may be subject to changes introduced after publication.
NOTE: The properties, strength, dimensions, installed characteristics and all other information in these materials are for guidance only to aid in the correct selection
of the products described herein and is not intended or implied as part of the above warranty. All applications should be evaluated for functional stability and available
samples of the described parts can be requested for installed tests, suitability and evaluations.
For more information please contact our Technical Services Department at tel. 714-850-6022
WHEN RE-ASSEMBLING:
-
Lubricate outside of pilot insert with o-ring
lubricant or eqiovalent.
-
Oil or grease heavily all sliding surfaces with
Lubriplate® or equivalent.
-
Use Loctite® 242 (removable) on sleeve and
collet threads.
-
