Hall probe
13: USB micro B port for measuring instrument
14: Hall chip
Functions:
1)
USB A port for probe
: to connect the Hall sensor/probe to the
measuring instrument.
2)
LCD
: to display the field strength and pole d
irection (“N” north pole,
“S“ south pole) etc.
3)
Unit select
: to select the display unit (Gs or mT).
4)
Zero reset
: to reset the measuring value.
5)
RMS/Peak select
: to select the display format of AC signal (RMS
value or Peak value).
6)
Max/Min hold
: to hold the max/min value.
7)
Local/Remote select
: to select the control mode (local or remote).
8)
Power switch
: to switch ON/OFF the measuring instrument.
9)
USB micro B port for PC connection
: to connect the external 5V
power supply and for data communication between Gaussmeter and
PC
10)
Display hold
: to hold the current value.
11)
AC/DC mode
: to select the measurement of AC or DC magnetic field.
12)
Measuring range
: to select the measuring between range 0-50mT
and 0-500mT for Hall Probes CYTP98A and CYAP98A or between 0-
200mT and 0-2000mT for Hall Probes CYTP98B and CYAP98B
13)
USB micro B port of Hall probe
: to connect the Hall probe to the
measuring instrument.
8. Measuring Procedure
1) Connect the Hall probe (13) to the measuring instrument (1) via micro
USB cable.
2) Install 3 x 1.5V AA battery to the battery compartment or connect the
+5V power supply via USB cable to the measuring instrument.
3)
Switch on the power of measuring instrument by pressing
“ON/OFF”
button (8), LCD display shows 0000.0mT or other value.
4)
Select measuring range
by pressing the
“Range” button (12), the
measuring range changes between 0-200mT and 0-2000mT as
follows (as example by using Hall probe CYTP98B or CYAP98B):
0-2000mT
0-200mT
14
13
Pole display (DC)
Measuring value
Display hold
Max/Min hold
RMS/Peak display (AC)
Data transmit
High-speed mode
Display unit
Power display
7
8
