ChemoMetec NucleoCounter, User Manual

Page: 32 / 76

4 Installation and Start-up
15
The start-up display shows the version number and date (year-
month-date) of the internal software of the NucleoCounter in
line 3 (“v4.XX” in Figure 8). The serial number of the
instrument is shown in line 4 in the display (“002-01” in
Figure 8).
After a successful start-up the display changes (Figure 9) and
the status indicator on the keyboard panel turns green.
NucleoCounter
Ready
Figure 9. The NucleoCounter is ready for cell counting
If the instrument has performed as described above, it is ready
for use. If the instrument displays an error message at start-
up please refer to chapter 7.
4.1.2 Shutting down
Pressing the “
On/Off
” button shuts down the NucleoCounter and
while the instrument shuts down, the display will momentarily
look as shown in Figure 10.
Bye. . .
Figure 10. The shutdown display .
4.2 Installation of NucleoView
Regarding installation of the optional NucleoView PC-software,
please refer to the NucleoView User’s Guide.