ChemInstruments SS-HT-30, Operating Instructions Manual

Page: 22 / 24

22 | P a g e
Static Shear Tester Operating Instructions (SS-RT-10, SS-HT-8, SS-HT-30)
TEST DATA

LOAD DATA
– Click to load the test data from the Shear Tester.

CALCULATE
– Click to calculate the selected positions desired for statistics and graph.

GRAPH
– Displays a graph of the selected positions.

DATA TABLE
– Changes the screen back to the Data Table from the graph.

ZOOM
– Displays an enlarged version of the graph.

□ – Click to select/unselect all positions. Click the box next to an individual position to
select/unselect individual positions. Selected positions will be used in calculations and
graph.

POSITION
– Displays the position of the test on the Shear Bank.

TIME (MINUTES)
– Displays the duration of the test in minutes.

TEMP
– ONLY IF OPTIONAL THERMOCOUPLE IS PURCHASED. Displays the
temperature recorded at the completion of the test. If no thermocouple is being used for
testing, the field will display NA.

STATUS
– Indicates if a test is COMPLETED or RUNNING.

FAILURE MODE
– Enter your own failure mode or choose from the preselected list and
click OK or hit the Enter key.

COMMENTS
– Enter a comment and click OK or hit the Enter key.