4
LCD Display
Main Power
Switch
BNC Connector
Thermocouple
Receptacle
Figure 1
Set up:
•
Insert detachable power cord into rear of unit and plug into electrical outlet
(AC voltage 110
-
240).
•
Connect pH probe to BNC input connector.
•
Connect Thermocouple to Thermocouple Receptacle (Pt100, Pt1000)
-
Use
Adapter provided for Thermocouple if needed.
•
Turn Main Power Switch to
“
ON
”
position
-
switch will illuminate.
•
Refer to
“
JUMO dTRANS pH
02”
manual for operating instructions.
4
LCD Display
Main Power
Switch
BNC Connector
Thermocouple
Receptacle
Figure 1
Set up:
•
Insert detachable power cord into rear of unit and plug into electrical outlet
(AC voltage 110
-
240).
•
Connect pH probe to BNC input connector.
•
Connect Thermocouple to Thermocouple Receptacle (Pt100, Pt1000)
-
Use
Adapter provided for Thermocouple if needed.
•
Turn Main Power Switch to
“
ON
”
position
-
switch will illuminate.
•
Refer to
“
JUMO dTRANS pH
02”
manual for operating instructions.
