background image

Cleaning & Descaling

IMPORTANT:

Clean your appliance frequently to avoid calcification and to  
guarantee a long life with low energy consumption.

Cleaning the base

• Unplug the appliance first.

• Clean the outside of the induction base with a soft cloth    
  moistened with warm water and some mild cleaning agent.

• Do not use chemicals, steel wool, or abrasive cleaners to clean  
  the inside or outside of the kettle as these may scratch the  
 surface.

Cl descaling the kettle

• Mineral deposits, especially from hard water cause scaling 
  which gradually slows down the heating process and reduces  
  performance. Therefore, cleaning is an integral part of the    
  equipment maintenance.

• Scale is not harmful to your health but it may give your drink  
  a powdery taste. 

• The kettle is dishwasher safe. Put the kettle upside down with  
  the lid removed and placed separately into the dishwasher.

• You can easily clean the kettle by hand. 

If the keep warm is activated from the beginning, 

it will 

first start with the heating process. This means that both the 
“single cycle” and “Keep Warm” icon will blink. When the set 
temperature is reached, you will hear an acoustic signal once,         
      meaning that the heating process is finished. After that it 
will switch to “Keep Warm” mode and only the “Keep Warm” 
icon will blink for the remaining 30 min (or until the kettle is 
removed). After these 30 minutes, the keep warm cycle is 
finished and there will be 3 acoustic signals.

As a safety precaution, it is necessary to press the “Keep 
Warm” button after removing and replacing the kettle on the 
base to resume the “Keep Warm” function. Once the kettle 
has resumed the "Keep Warm" temperature, there will be a 
single acoustic sound.

If the kettle is removed from the base for more than 90  
seconds the unit will go to standby mode.

Anytime you would like to stop the process and switch to 
standby you can do so by pressing the On/Off button.

IMPORTANT:

Always pour out excess water after heating in order to avoid 
excessive calcification.

Do not touch the metal bottom of the kettle in case it is 
still hot.

200

Summary of Contents for Chettle














Reviews: