4) Place the host swing arm unit on the control module and the support swing arm on the support and push each swing
arm onto the metal axis.
IMPORTANT!
The left hand swing arm has a half-round hole. This must align with the matching half round axle on
the left hand swing mechanism (with the music panel).
Push a plastic locking ring on to the end of each axle, carefully pull each swing arm to check they are locked on,
finally insert a plastic cover into each swing arm.
5) Separately insert the backrest tube/footrest tube into the FRONT/BACK of the position adjustment component
holders until the snap pins click and ensure that it has locked into place.
6) Slide the seat cover on to the seat frame assembly.
