Electric Induction hobs Chef’s
EH-DIH386 & EH-MIX386
25
surface to monitor temperatures. Further temperature sensors along the heat sink protect
the electronics itself against overheating.
If temperature threshold value is exceeded, the induction will reduce the power
output in order to prevent a further increase in temperature. The Touch Control
indicates the same cooking level as selected by the operator and also issues the
relevant „previous“ target output value. Should the temperature of a cooking zone exceed
an upper temperature threshold value, the cooking zone is disconnected automatically.
If the NTC measures the temperature on TC board exceed 105C, the unit will be
shut down and display ‘E4’, only if the temperature is reduced to 95C, the error will be
cancelled.
16. Rice cooking function
-
This is a smart cooking mode and convenient, the rice cooking automatic function.
-
This mode automatically adjusts the power level at different time intervals.
-
Time to rice cooking complete default is 37 minutes. And time will automatically
count down until the end of time 0.
-
When this feature is actived, the power level and time can not be changed and is
displayed by default.
-
After completing the screen will display alphanumeric characters "End".
-
The alarm warning beep beep for 2 minutes, then turn off.
Active Rice cooking function:
-
In the cooker is turned on the all cooking zone, the keyboard controller will display
two separate cooking area,
-
Select the rice cooking function as required in each area cooking on the keyboard
by touching on rice symbol key of each cooking zone.
-
The rice cooking function is actived.
-
The screen of led 7 segments display character "rci".
-
Time and cooking power level changes automatically displayed on the screen.
-
After completing the screen will display alphanumeric characters "End".
-
The alarm warning beep beep for 2 minutes, then turn off.
Fig. 15: Active the rice cooking function by touching on symbol “rice” key .
