Chef's Choice EdgeSelect-Pro Diamond Hone 125 Instruction Manual Download Page 2

2

imPortant saFEGuarDs

When using electrical appliances, basic safety precautions should always be  

followed including the following:

1.   Read all instructions.
2.   To protect against electrical hazards, do not immerse the Chef’sChoice

®

 Knife 

Sharpener in water or other liquid.

3.   Make sure only clean knife blades are inserted in the Chef’sChoice

®

 Knife Sharpener.

4.   Unplug from outlet when not in use, before putting on or taking off parts and  

before cleaning.

5.   Avoid contacting moving parts.
6.   Do not operate any appliance with a damaged cord or plug or after the appliance 

malfunctions, or is dropped or damaged in any manner. 

U.S. customers:

 You may return your sharpener to EdgeCraft Corporation for service 

where the cost of repair or electrical or mechanical adjustment can be estimated. When 
the electrical cord on this appliance is damaged, it must be replaced by EdgeCraft 
Corporation or other qualified service to avoid the danger of electrical shock.

Outside U.S.:

 Please return your sharpener to your local distributor where the cost of repair 

or electrical or mechanical adjustment can be estimated. If the supply cord of this  
appliance is damaged, it must be replaced by a repair facility appointed by the  
manufacturer because special tools are required. Please consult your EdgeCraft  
Corporation distributor.  

7.  CAUTION! This appliance may be fitted with a polarized plug (one blade is wider than 

the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet 
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does 
not fit, contact a qualified electrician. 

Do not modify the plug in any way.

8.   The use of attachments not recommended or sold by EdgeCraft Corporation may 

cause fire, electric shock or injury.

9.   The Chef’sChoice

®

 EdgeSelect-Pro

 Knife Sharpener is designed to sharpen kitchen 

knives, pocket knives and most sports knives. Do not attempt to sharpen scissors,  
ax blades or any blade that does not fit freely in the slots.

10. Do not let the cord hang over edge of table or counter or touch hot surfaces.
11. When in the “ON” position (Red flash on switch is exposed when “on”) the 

Chef’sChoice

®

 Knife Sharpener should always be on a stable countertop or table.

12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR CHEf’SCHOICE

®

 KNIfE  

SHARPENER WILL BE SHARPER THAN YOU EXPECT. TO AVOID INJURY, USE AND  
HANDLE THEM WITH EXTREME CARE. DO NOT CUT TOWARD ANY PART Of YOUR  
fINGERS, HAND OR BODY. DO NOT RUN fINGER ALONG EDGE. STORE IN A SAfE MANNER.

13. Do not use outdoors.
14. Close supervision is necessary when any appliance is used by or near children.
15. Do not use honing oils, water or any other lubricant with the Chef’sChoice

®

  

EdgeSelect-Pro

 Diamond Hone

®

 Knife Sharpener.

16. 

SAVE THESE INSTRUCTIONS.

Summary of Contents for EdgeSelect-Pro Diamond Hone 125













Reviews: