3
Control Panel
Program Set
Ensure the Convection Oven is plugged in
Press “Power” button to turn on
The oven is in
Program Mode (P) by default. Press “P/M” button to
switch between Program Mode (P) and Multi-Stage Cooking Mode (M)
Programming for Program Mode (P)
Ensure the oven is in
“P” mode
Press
“Set” and then one of the program numbers “1-5”. The screens
start to blink
Select the desired temperature (5-260°C)
with the “Up” / “Down”
switches for temperature and time (Max. 99mins 59sec
s) with the “Up”
/ “Down” switches for timer
P
ress “Set” to save the program
Repeat the above steps to set the rest of programs if required
Programming for Multi-Stage Cooking Mode (M)
Ensure the oven is in
“M” mode
Press
“Set” and the number buttons “1-5” start to blink
Press “1” & the button blinks. Select the desired temperature (5-260°C)
with the “Up” / “Down” buttons for temperature and time (Max. 99mins
59secs) with the “Up” / “Down” buttons for timer
When done, press “Set” to complete the set up for stage 1. It will turn
into the setting for stage 2 automatically
& the “2” button blinks
5 stages can be programmed in maximum. Repeat the above steps to
set the rest of stages if required. If no program is required for the rest
of stages, set time = 0 and press “Set” for each until stage 5 is set
The program for Multi-Stage Cooking Mode (M) is now ready to use
