10
MODEL: RJ11-17-GPT
MODEL: RJ11-17-GPT
HOW TO CLEAN YOUR KETTLE
1. Unplug the Kettle and allow it to cool.
2. Once it’s completely cool, gently wipe down exterior of Kettle with a damp cloth or
paper towel.
3. If desired, remove the tea infuser holder by pulling upwards. (To reattach, position the
holder so the small divet is located on the top right. Place holder into kettle so small divet
aligns with small notch inside Kettle. Push in. See images below.) Rinse the inside of the
Kettle with water. Use a couple of drops of soap if necessary.
WARNING:
Never immerse the Kettle, its base, the cord or the plug in water or any
other liquids.
IMPORTANT:
The electrical connections must never come into contact with water or
any other liquids.
4. If desired, remove the pour spout filter by placing your finger underneath the filter and
unclip; pull outwards. (The filter may be reattached by lining up the curved size with the
Kettle’s spout and sliding into the filter’s holder. Push down until it clicks.)
5. Wash with warm, soapy water and a sponge.
6. Dry completely.
Cleaning and Maintenance
TEMP
STEEP
TEMP
STEEP
