7
8
OPERATING INSTRUCTIONS
5.
Add the ingredients to be blended to the pitcher up to the “Max” line.
WARNING:
To avoid leaking and/or personal injury, never fill past the “Max” line as
foods, especially liquids, rise in the pitcher when blended.
6.
Secure the lid on the pitcher by twisting it clockwise. If filler cap is not in already, insert
it into lid and twist clockwise until you hear a click to seal. (You can remove the filler
cap during blending to add ingredients.)
7.
Position the pitcher on the base by inserting the blade attachment collar into the motor
base and fitting the locking tabs on the blade attachment into the slots on the motor
base. Press the pitcher firmly down into the base, then turn clockwise until the blade
attachment tabs lock securely in position.
8.
Plug in the blender and press a speed button (HIGH, MEDIUM, LOW, or PULSE) to
begin blending. (See p. 9 for more information on speeds.)
WARNING:
Do not operate the motor continuously for more than 1 minute at a time.
Allow the motor to rest for 3 minutes before continuing.
9.
Press the OFF button to stop blending. (If using the pulse function, the unit will turn off
when the PULSE button is released.)
10.
Remove the blending pitcher from base by rotating it counterclockwise.
HOW TO BLEND IN A TUMBLER
For smaller amounts, for blending and storing, or for making smoothie drinks to go,
use a tumbler.
1. Follow steps 1-3 from How to Blend in the Blending Pitcher on p. 6.
2. Add ingredients to tumbler; do not exceed the “Max” line.
3. Holding the blade attachment by its collar, screw it on to the open end of the
tumbler and turn it clockwise to tighten.
NOTE:
The blade attachment goes on what
will be the top of the tumbler after blending is done.
4. Position the tumbler on the base by inserting the blade attachment collar into the
motor base and fitting the locking tabs on the blade attachment into the slots on the
motor base. Press the tumbler firmly down into the base, then turn clockwise until the
blade attachment tabs lock securely in position.
5. Plug in the blender and press a speed button (HIGH, MEDIUM, LOW, or PULSE) to
begin blending. (See p. 9 for more information on speeds.)
WARNING:
Do not operate
the motor continuously for more than 1 minute at a time. Allow the motor to rest for 3
minutes before continuing.
6. Press the OFF button to stop blending. (If using the pulse function, the unit will turn
off when the PULSE button is released.)
7. Remove the tumbler from the base by turning blade attachment counterclockwise,
then flip tumbler over so that the blade attachment is facing up. Twist the blade collar
counterclockwise, and then lift blade attachment up and out of the tumbler.
8. If drinking straight from the tumbler, press the tumbler comfort ring onto the lip
of the tumbler. If taking the tumbler on the road, put on the travel lid. If storing the
contents in the tumbler, put on the storage lid.
OPERATING INSTRUCTIONS
Summary of Contents for DYNAMIC RJ35-V2
Page 13: ...21...
