5
BEFORE USING FOR THE FIRST TIME
1. Carefully unpack the Power Blender and remove all packaging materials
2. Following the detailed procedures described in CARE & CLEANING
INSTRUCTIONS, wash, rinse, sanitize and dry blender parts before assembly.
3. Clean and sanitize the motor base.
WARNING: NEVER IMMERSE THE MOTOR BASE OR CORD IN WATER.
SOFT START
1. This Chef-Built Power Blender features a 3 second “soft start.”
2. Blending will gradually increase until desired speed setting is reached.
OPERATING INSTRUCTIONS
1. The 64 oz. Chef-Built Commercial Power Blender Tritan
®
Jar is equipped with
fixed stainless-steel blades that require no assembly.
2.
Place the motor base on a flat, clean, dry counter top or table, away from
flammable materials.
3. Make sure the unit is unplugged. Check to make sure the ON/OFF (I/O) switch on
the side of the motor base is in the OFF (O) position.
4. Place the jar on the motor base so that the jar coupler and motor coupler are
aligned and engaged.
IMPORTANT:
Make sure the jar is properly fitted onto the motor base before
adding food for blending.
5. Add food to be processed to the jar.
WARNING:
When blending, foods or liquids tend to expand and rise up the side
of the jar. To avoid personal injury, leakage or damage to the Power Blender,
DO NOT FILL JAR WITH FOOD PAST THE MAX FILL LINE.
6.
Place the lid on top of the jar and press firmly to seal. To avoid spills, make sure
the lid is secure and the lid cap is in place before operation.
7. Plug the power cord into a 120V AC 3-prong electrical outlet.
8. This appliance has two speed settings, HIGH (=) at upper position and LOW (-) at
lower position. Press the rocker switch to the desired position.
9.
When finished blending, set rocker switch back to STANDBY position in the center.
10. This appliance is equipped with a momentary PULSE option. Hold the rocker
switch down to engage PULSE function. Unit will run on HIGH (=) speed until the
rocker switch is released.
IMPORTANT:
Always hold jar with one hand when starting and while blending.
11. CAUTION:
Pay close attention while processing. Never operate the Power
Blender when the jar is empty, except when SANITIZING. (See SANITIZE & DRY
CONTAINER section.)
12. TO CRUSH ICE: Blend continuously on HIGH (=). Check contents. If necessary,
add liquid and continue to process until all cubes are reduced to the desired
consistency.
IMPORTANT:
Always hold jar with one hand when starting and while crushing ice.
13. When blending is complete, press the ON/OFF (I/O) switch to OFF (O).
14. Allow the motor to come to a complete STOP before removing jar from the motor
base.
SO-315121_18063_Chef-Built_Power Blender CCB-3500_Sensio_IM_R6.indd 5
2018-08-10 3:09 PM
