CHEETAH Hardware User’s Manual
Imperx, Inc.
Rev. 1.6
6421 Congress Ave.
8/26/2016
Boca Raton, FL 33487
+1 (561) 989-0006
74 of 121
Pulse Generator Pulse Period
This register sets the value of the pulse period in microseconds.
Address
:
0x0698
Data (19:0)
:
<value> – pulse width in microseconds
Data (31:20)
:
N/A
Pulse Generator Number of Pulses
This register sets the number of the pulses generated when the Pulse
Generator Mode is set to Burst Mode (discrete number of pulses)
Address
:
0x069C
Data (15:0)
:
<value> – number of discrete pulses
Data (31:16)
:
N/A
Pulse Generator Mode
This register sets the Pulse Generator to either continuous mode or burst
mode.
Address
:
0x06A4
Data (0)
:
0 – Continuous Mode - continuous pulse generation
1 – Burst Mode - Generate discrete number of
pulses (see
Pulse Generator Number of Pulses
section, register 0x069C)
Data (31:1)
:
N/A
Pulse Generator Enable
This register enables the pulse generator.
Address
:
0x06A0
Data (0)
:
0 – disable pulse generator operation
1 – enable pulse generator operation
Data (31:1)
:
N/A
3.3.17 Test Pattern Workspace Registers
Test Mode Select
This register selects the test mode pattern.
Address
:
0x0428
Data (3:0)
:
000 – no test pattern
001 – steady horizontal image ramp
010 – steady vertical image ramp
011 – moving horizontal image ramp
