CheckSum G-50, Instruction Manual, Page: 4 / 70

Figures & Illustrations
Figure 1 - System Block Diagram 7
Figure 2 - SR -500 Jumpering 12
Figure 3 - SR -500 Installation 15
Figure 4 - System Menu 19
Figure 5 - Configure/Install System Menu 20
Figure 6 - SR -500 Test Point Pin Out 21
Figure 7 - System Menu 24
Figure 8 - File Select Menu 26
Figure 9 - File Selection List 27
Figure 10 - Test Failure Display 28
Figure 11 - Test Completed Menu 29
Figure 12 - Assembly Learn Menu 33
Figure 13 - Pin and Wire Name Entry Screen 34
Figure 14 - Operator Comments Entry Screen 36
Figure 15 - Sample Text File 39
Figure 16 - Pin Locating Display 41
Figure 17 - Cable Assembly Display 42
Figure 18 - Self-Test Result Display 43
Figure 19 - Self-Test Failure Display 44
Figure 20 - Configure/Install System Menu 45
Figure 21 - Report Configuration Menu 48
Figure A1 - SR-500 I/O Port Pin Out Ap 2
Figure A2 - Cable Test Report With Failure Ap 3
Figure A3 - Cable Test Report With No Failure Ap 4
Figure A4 - Cable Wiring Report Ap 5
Figure A5 - Batch Test Report Ap 6
Table A1 - SR -500 Base Address Jumpers Ap 8
Table A2 - Computer I/O Port Assignments Ap 9
Table A3 - File Error Messages Ap 11
CheckSum Model G-50 Manual - Page 2