Checkline SLW, User Manual

Page: 30 / 44

humimeter SLW User Manual
Page 30
Exporting moisture readings from the humimeter SLW
Connect the humimeter SLW to your computer using the
supplied USB cable:
1. Insert the USB Mini B connector into the humi
meter SLW (figure 55 ).
2. Insert the USB connector into the computer.
3. Open LogMemorizer on your computer.
4. Switch on the humimeter SLW.
5. Press twice or hold for 2 seconds.
6. Select Send Logs (figure 56 ). To do so, press or
and confirm by pressing .
7. Select Manual Logs (figure 57 ). To do so, press
or and confirm by pressing .
8. The display will then show the message Send
(figure 58 ).
» All measuring values saved on the humimeter SLW
will now be sent to your computer.
Initiating the data export at your computer
Connect the humimeter SLW to your computer using the supplied USB cable:
1. Insert the USB Mini B connector into the humim-
eter SLW (figure 59 ).
2. Insert the USB connector into the computer.
3. Open LogMemorizer on your computer.
4. Switch on the humimeter SLW.
5. Open the Communication tab in LogMemorizer (figure 60 ).
55
56
57
58
59
60