Checkline humimeter RH5, Operating Manual, Page: 30 / 48

humimeter RH5 & RH5.1 Operating Manual
Page 30
Exporting moisture readings from the humimeter RH5
Connect the humimeter RH5 to your computer using the
supplied USB cable.
1. Insert the USB Mini B connector into the humime-
ter RH5 (figure 48) .
2. Insert the USB connector into the computer.
3. Open LogMemorizer on your computer.
4. Switch on the humimeter RH5.
5. Press twice or hold for 2 seconds.
6. Select Send Logs (figure 49 ). To do so, press or
and confirm by pressing .
7. Select Manual Logs or Auto Logs (figure 50 ). To do
so, press or and confirm by pressing .
» The display will then show the message Send
(figure 51 ).
»
All of the measuring values saved on the humime-
ter RH5 will now be sent to your computer.
Initiating the data export at your computer
Connect the humimeter RH5 to your computer using the supplied USB cable.
1. Insert the USB Mini B connector into the humime-
ter RH5 (figure 52 ).
2. Insert the USB connector into the computer.
3. Open LogMemorizer on your computer.
4. Switch on the humimeter RH5.
5. Open the Communication tab in LogMemorizer (figure 53 ).
48
49
50
51
52
53