Procedure
Quantum Smart-1 6000-L/6000-XL Appliances Replacing Memory | 15
Caution
- To prevent damage to the DIMM or the memory socket during installation, do not bend or
flex the DIMM. You must insert both ends of the DIMM simultaneously.
2.
Open the ejectors on the memory socket outward to allow the DIMM to be inserted into the socket.
3.
Align the edge connector of the DIMM with the alignment key of the memory socket, and insert the
DIMM in the socket.
Caution
- Do not apply pressure at the center of the DIMM; apply pressure at both ends of the DIMM
evenly.
Note
- The memory socket has an alignment key that enables you to install the DIMM in the socket in
only one orientation.
4.
Press the DIMM with your thumbs until the socket levers firmly click into place.
Installing the Cooling Air Shroud
1.
Align the tabs on the air shroud with the slots on the appliance.
2.
Lower the air shroud into the appliance until it is firmly seated.
Note
- When firmly seated, the memory socket numbers marked on the air shroud will align with the
respective memory sockets.
