Windows 8 & 10 configuration:
1.
Right-click a
network
adapter to
assign an IP address and click
Properties
.
2.
Select Internet Protocol Version 4
(TCP/IPv4) and click the
Properties
button.
3.
In the IP address field,
enter
192.168.1.2
.
4.
In the Subnet mask field,
enter
255.255.255.0
.
5.
Leave the
Default gateway
and
DNS settings
fields empty.
Figure 1
Internet Protocol (TCP/IP) Properties
•
Initial setup must be done from a PC connected to the appliance’s
management interface via the included Ethernet cable. The management
interface is marked as MGMT on the appliance front panel.
CONNECT YOUR PC FOR INITIAL SETUP
2
6.
Click
OK
and close the dialog boxes.
After completing the initial connection, the First Time Configuration Wizard
guides you through the process of configuring the appliance.
