Rack Mounting for 5000, 6000, 7000, TE100X, and Smart-1 405/410 Appliances
Rack Mounting for 5000, 6000, 7000, TE100X, and Smart-1 405/410 Appliances | 20
Attaching the Outer Rack Rails
Attach the outer rack rails to the rack. Make sure that you have the two rack rails ready.
Item
Description
1
Rack rail screws (attached to the end of the rack rail)
2
Screw hole with rack mounting screw
3
Securing clip
4
Rack rail
To attach the outer rails to the rack:
1. If your rack has round holes, make sure to complete
"Preparing Round-Hole Rack Rails" on page 18
.
2. Align the front end of the outer rail with the hole number.
n
Make sure that the securing clip faces the inner part of the rack.
3. Gently pull forward and connect the outer rail to the rack by inserting the rack rail screws into the rack
holes.
4. Do steps 1 - 3 again to attach the rear end of the outer rail to the rack.
The rear securing clips are marked with the letters
R
(for the right rack rail) and
L
(for the left rack rail).
5. Use a rack mounting screw to secure the rear end of the outer rail to the rack.
6. Do steps 1 - 5 again for the other outer rail.
