©2010 Check Point Software Technologies Ltd. All rights reserved.
Classification: [Unrestricted] — For everyone | P.
7
2. Extend the outer rail bracket (A) to the back of the rack, and using 2 screw/washer
pairs, firmly tighten the bracket to the back of the rack.
3. From the side of the rack, tighten the 4 nuts that were used to partially secure the
brackets to the rails. (See alternate procedure on next page if access to the side of the
rack is not possible.)
4. Repeats steps from previous page and this page for attaching the 2nd outer rail to other
side of rack. Ensure that the brackets/rails are at the same height of rack.
5. Adjust the middle rail to about 2.5 inches from the front rack post. The length may be a
little different on different styles of cabinet. (If attaching rails to a 29 inch rack, there
may not be enough space to slide the middle rail back. If so, the ear bracket of platform
may not reach the front of rack.)
