VK-8M
Remote Controller
Model 8-708 ver. 1.0
Copyright © 2004 CHD Elektroservis, s.r.o.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis, s.r.o.
7
6. TECHNICAL SPECIFICATIONS
Supply voltage:
external power supply unit - DC 8 to 15 V
Current power consumption:
max 100 mA
Protection:
protected against reversal of supply voltage polarity
Transit MIDI data delay MIDI:
„BUS-IN“
→
„BUS-THRU“ type 0.005 ms
„BUS-IN“
→
„VK8M-OUT“ type 0.6 ms, max 1 ms
MIDI connectors:
DIN 41524 (5 pins 180°)
Dimensions (mm / inch):
189 / 7.44 (width) x 48.5 / 1.91 (height) x 139.5 / 5.49mm (depth)
Weight:
approx. 300g
Electrical design:
under the regulations of the ČSN EN 60335-1+A55, ČSN EN 60335-2-45
EMC:
under the regulations of the ČSN EN 55014
Operating environment:
standard
Range of operating temperature: +10 to +35° C
Relative environmental humidity: up to 85 %
7. WARRANTY CONDITIONS
The equipment is provided with
thirty-month warranty
starting from the date of the equipment take-over by the customer.
This date must be specified on warranty list together with dealer's confirmation.
During this period of time, all defects of equipment or its accessories, caused by defective material or faulty manufacturing,
will be removed free of charge.
Warranty repair is asserted by the customer against the dealer.
Warranty period is to be extended for the time period, during which the product was under the warranty repair.
The relevant legal regulations take effect in case of cancellation of purchase contract.
The customer will lose the right for free warranty repair, if he will not be able to submit properly filled out warranty list or if
the defects of the product had been caused by:
- unavoidable event (natural disaster),
- connecting the device to the incorrect supply voltage,
- inputs or outputs overloading by connecting the signals source or load source with not-corresponding characteristics etc.,
- faulty equipment operation, which is at variance with the instructions referred-to in the operating manual,
- mechanical damage caused by consumer during transportation or usage of equipment,
- unprofessional interference with the equipment or by equipment modification without manufacturer’s approval.
Summary of Contents for VK-8M
Page 8: ......