Getting Started with X900U+
17
(4)
After the processing completes, please close the uploader, and then power off and
power on the receiver again.
(5)
Now, the whole update has been finished successfully.
2.7
Downloading Logged Data
Data logging involves the collection of GNSS measurement data over a period at a
static point or points, and subsequent post-processing of the information to accurately
compute baseline information. Data logging using receivers requires access to suitable
GNSS post-processing software such as the CHC Geomatics Office (CGO) Software.
The procedures for downloading logged data in the receiver are as follows:
(1)
Switch on the receiver and connect it to a computer by USB Cable. After the
successful connection, a removable disk named as the Serial Number (SN) of the
receiver will appear on the computer.
(2)
Double-click the removable disk, and the user can see the folder named as “repo”.
Double click this folder, the user can see 2 folders. The “log” folder is used to save
the log files.
(3)
Double-click the folder that user has configured to store the static data, and then
see the folder(s) created by the X900U+ system automatically and named by the
date which is decided by GPS time when user start to log data.
(4)
Select the destination folder and double-click it, and then two folders named as
different data format (hcn and rinex) will be displayed.
(5)
Select the data format that user has configured to save the static data, and user
will find the static raw data.
