APACHE 3 User Guide (Network Bridge Version)
| 2021-02
P a g e
| 26
3.4.3 start work
When the new projects, parameters, data, settings and other preparations are done
well, data can be recorded.
①Choose [measure mode]
② Toolbar
indicates the start, pause, and stop the record. Meantime,
line name could be entered at the beginning of measuring.
③In order to facilitate post processing and prevent massive loss of data in
unexpected cases, it is suggested to change a line every 300 or 500 points.
④When the data in the test area is measured, click on [stop] and then to save the
project by clicking [Project] – [Save Project] before close the software.
Figure 3-24 Import background map
When the unmanned boat travels to the designated route to be measured, click
[Measure]
→
[Start]
then pop up the setting line information interface. The line
name and line number are set by default. The auto switch selects 2000 points for
automatic line change.
Click
[Measure]
→
[End]
after the measurement area task is completed
Stop here, you can start you measuring work.
