iGage
X9x User Manual
page 19 of 53
SurvCE will convert to your job’s units as appropriate:
17.
Next select the RTK tab.
Set the Device to ‘Cable or Generic Device’ and choose
CMR+, RTCM3.0 or RTCM3.2 for the message type.
NOTE: You may choose CMR+ or RTCM3 for the
message type,
however the Base and Rover MUST
Match Exactly
!
Typically
X900+
= RTCM3.2
X91+
= CMR+
18.
Click on the green check mark (upper right) and SurvCE
will configure the receiver:
19.
After 10 seconds, you are prompted to enter a position
or read the GPS. Select the correct option for your job:
20.
If you choose to ‘Read From GPS’: