Operation
Xeno™ 2500 User Manual Rev. 1
11
4. Operation
Control Panel
Description
Button
Function
<MENU>
Sets the currently selected value into the selected function
or exits from the current menu or function. Press and hold
for 3 seconds to turn display backlight off
<UP>
Navigates upward through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downward through the menu list and decreases the
numeric value when in a function
Control Options
You can set the Xeno™ 2500 start address in the 001~512 DMX range. This allows for
the control of up to 128 products in the 4-channel mode. The Xeno™ 2500 works with
any compatible DMX controller using standard DMX cables.
Programming
Carry out all the programming procedures indicated below from the control panel. Refer
to the
Menu Map
to learn how the menu options relate to each other.
DMX Address
1. Go to
A.
(
001~512
) in the main level.
2. To change the current address, press
<UP>
or
<DOWN>
(pressing
<UP>
and
<DOWN>
keys at the same time will return the setting to
001
).
DMX Mode
1. Go to
d.
(
3~4
)
CH
in the main level.
2. To change the current mode, press
<UP>
or
<DOWN>
.
Standalone Flash Mode
This mode allows you to set the flash speed in the control panel without need of a
separate controller.
1. Go to
FL.
(
00~99
) in the main level.
2. Select the Flash Speed (
00~99
).
Sound–Active Flash Mode
This mode allows you to set the product to activate using the microphone located on the
bottom of the product. The intensity control knob can be used to adjust the sensitivity of
the microphone.
Aud.0
is used for a single product while
Aud.1~9
may be used for
multiple products connected via the SLAVE OUT connection.
1. Go to
Aud.
(
0~9
)
in the main level.
2. Select the sound-active mode (
0~9
).