Operation
Synapse 4 User Manual Rev. 2
-11-
Configuration
The Synapse 4 allows control from both the control panel and remotely via DMX.
Power Setup
This option chooses how the power outputs are controlled.
1. Go to the
Power Setup
main level.
2. Select the desired control function.
a.
Turn Off
– turns all power outputs off
b.
Turn On
– turns all power outputs on
c.
On/Off Via DMX
– control of the power outputs is controlled via DMX
d.
On If DMX On
– Turns power outputs on/off as DMX is detected.
e.
Scheduler
– Product power output is controlled by the events set in the scheduler
Output Delay
Setting
This option sets how long the power outputs are delayed from turning on/off. This option is
useful when turning on more than one high power draw product at the same time. Set the
Synapse 4 or each of its 4 outputs to turn on at a different time to avoid overloading a power
system.
1. Go to the
Output Delay
main level.
2. Choose
All Power Ports
or
Unit Power Port
a. Select
All Power Ports
•
Select
All Power Ports On
•
Set the delay to turn on (
0-120 s
).
•
Select
All Power Ports Off
•
Set the delay to turn off (
0-120 s
).
b. Select
Unit Power Port
•
Select
Power Port
(
1
,
2
,
3
, or
4
)
•
Select
Power Port
(
1
,
2
,
3
, or
4
)
On
•
Set the delay to turn on (
0-120 s
).
•
Select
Power Port
(
1
,
2
,
3
, or
4
)
Off
•
Set the delay to turn off (
0-120 s
).
•
Repeat for each power port number
Date and Time
Setting
This option sets the date and time. The date and time setting is needed in order for the
scheduler option to work correctly.
1. Go to the
Date & Time
main level.
2. Select
Clock Setting
.
a. Enter the month (
00/
)
b. Enter the date (
/00/
)
c. Enter the year (
/2015
)
d. Enter the hour (
00:
)
e. Enter the minutes (
:00
)
Summary of Contents for Synapse 4
Page 1: ...User Manual ...
Page 4: ......
