Chauvet STRIKE P38, User Manual

Page: 12 / 20

Page 8 of 16
Operation
STRIKE P38 User Manual Rev. 1
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
This setting allows you to choose a particular control personality.
1. Go to the DMX Personality main level.
2. Select the desired personality (see table below).
Starting Address
Each product will respond to a unique starting address from the DMX controller. All products with the same
starting address will respond in unison.
1. Go to the DMX Address main level.
2. Select the starting address ( 001 – 512 ).
The highest recommended starting address for each DMX mode is as follows:
Information
Fixture Hours <_ _ _ _H> Shows total hours the product has been on
Version <V_._> Shows current firmware version
UID
<_ _ _ _ _ _ _
_>
Shows product UID
Reset Factory
No
Resets the product to factory default settings
Yes
Personality Channels
3 Ch 3
4 Ch 4
5 Ch 5
6 Ch 6
• See the Starting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the
new personality setting.
Personality Address
3 Ch 510
4 Ch 509
5 Ch 508
6 Ch 507
Main Level Programming Levels Description