Chauvet SlimPAR T6 USB, Quick Reference Manual, Page: 4 / 60

SlimPAR™ T6 USB QRG EN
4
Fuse
Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the Safety Notes . Make sure
the mounting clamp is capable of supporting the weight of the
product. For our Chauvet line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html .
Mounting
Diagram
Control Panel
Description
Button Function
<MENU> Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the
numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
Bracket Adjustment Knob
Mounting Bracket
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Safety Cable
(such as CH-05
from Chauvet)