Chauvet SlimPAR QUAD 3 IRC, User Manual

Page: 10 / 19

Page 10 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
4. O
PERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MENU>
Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Menu Map
Mode Programming Steps Description
DMX
Personalities
and Starting
Address
4-CH
d 1—d512
Selects the DMX personality and
starting address
9-CH
Static Colors C-- C 1—C 15
Selects static color
Auto Programs P-- P 1—P 4
Selects auto program
Program Speed S-- S 1—S100
Selects auto program speed (slow to fast)
Sound-Active
Mode
Snd
Snd1
Selects Sound-Active program (4-color)
Snd2
Selects Sound-Active program (15-color)
Sound
Sensitivity
SenS u 1—u100
Sets sound sensitivity
Custom Color
Mixing
U--
r 0—r255
Red (0—100%)
g 0—g255
Green (0—100%)
b 0—b255
Blue (0—100%)
A 0—A255
Amber (0—100%)
Dimmer Mode dIM
OFF
Dimmer, off
dIM1
Dimmer, fast speed
dIM2
Dimmer, medium speed
dIM3
Dimmer, slow speed
Infrared SET
On
Turns infrared on or off
OFF
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The SlimPAR™ QUAD 3 IRC uses up to 9 DMX channels in its 9-channel DMX mode,
which defines the highest configurable address to
504
.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com .
To select the DMX personality and starting address, do the following:
1. Press
<MENU>
repeatedly until
4-CH
(4-channel mode) or
9-CH
(9-channel mode)
shows on the display.
2. Press
<ENTER>
and
d 1
—
d512
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the starting address.
4. Press
<ENTER>
.