Page 14 of 20
O
PERATION
SlimPAR Pro Pix User Manual Rev. 1
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Automatic Programs
To run the SlimPAR Pro Pix in automatic mode, follow the instructions below:
1.
Press
<MENU>
repeatedly until
P--
shows on the display.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select an automatic program, from
P
(
1–6
).
4.
Press
<ENTER>
.
Auto-Program Speed
To change the auto-program speed on the SlimPAR Pro Pix, do the following:
1.
Press
<MENU>
repeatedly until
S--
shows on the display.
2.
Use
<UP>
or
<DOWN>
to increase or decrease the program speed, from (
S001–100
).
3.
Press
<ENTER>
. The product will return to the last selected mode.
Sound-Active Mode
To run the SlimPAR Pro Pix in sound-active mode, follow the instructions below:
1.
Press
<MENU>
repeatedly until
Snd
shows on the display.
2.
Press
<ENTER>
3.
Use
<UP>
and
<DOWN>
to select a sound active program (
Snd1–6
).
4.
Press
<ENTER>
.
Sound Sensitivity
To set the sound sensitivity on the SlimPAR Pro Pix, do the following:
1.
Press
<MENU>
repeatedly until
SENS
shows on the display.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select a static color, from (
U1–100
).
4.
Press
<ENTER>
.
Preset Color Mode
To run the SlimPAR Pro Pix on a static color, follow the instructions below:
1.
Press
<MENU>
repeatedly until
C1
(for static PAR colors) or
C2
(for the outer LED ring colors)
shows on the display.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select a static color, from
C 1–24
for the static PAR colors or
C 1–19
for
outer LED ring colors.
4.
Press
<ENTER>
.
Custom Color Mixing
To custom mix a static color, do the following:
1.
Press
<MENU>
repeatedly until
U--
shows on the display.
2.
Press
<ENTER>
and one of the following will show on display.
•
R_ _ _
(red)
•
G_ _ _
(green)
•
B_ _ _
(blue)
•
A_ _ _
(amber)
•
W_ _ _
(white)
•
U_ _ _
(UV)
3.
Press
<ENTER>
to cycle through the color settings.
4.
When the desired color shows on the display, use
<UP>
or
<DOWN>
to increase or decrease the
color value, from
000–255
.
5.
Repeat steps 3 and 4 until the product outputs as desired.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
The product will only respond to low frequencies of music (bass and drums).