Chauvet Sgocker 90 IRC, User Manual

Page: 9 / 18

Shocker™ 90 IRC User Manual Rev. 1 Page 9 of 18
4. O
PERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the display.
Please refer to the
Product Overview to see the button locations on the control panel.
Button Function
<MENU>
Press to find an operation mode or to back out of the current menu
option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Menu Map
Mode Programming Steps Description
DMX Personality and
Starting Address
2-CH
d 1–d512
Selects the DMX personality and starting
address
5-CH
8-CH
Auto Programs P-- P 0–P 7 Selects auto programs 0–7
Program Speed S-- S 1–S100 Sets auto program speed
Custom U--
d 0 – d255 Sets dimmer (0–100%)
S 0 – S255 Selects the strobe speed, slow to fast (0–28 Hz)
Sound-Active Snd
Snd1
Sets the Sound-Active mode
Snd2
Sound Sensitivity SenS u 0–u100 Selects the sound sensitivity
Infrared SET
ON
Turns Infrared mode on or off
OFF
Temperature
Temp
Shows current temperature of the product
DMX Linking
The Shocker™ 90 IRC works with a DMX controller. Information about DMX is in the
CHAUVET® DMX Primer,
which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf .
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Shocker™ 90 IRC uses up to 8 DMX channels, which defines the highest configurable
address to
505 .
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com .
To select the starting address, do the following:
1. Press <MENU> repeatedly until the desired DMX mode ( 2-CH , 5-CH , or 8-CH ) shows
on the display.
2. Press <ENTER> and d 0-d512 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER> .